AVK MAGNUS™ PE BALL VALVES, GAS MOP10 / WATER PN16
Universal PE ball valve AVK MAGNUS™ with stem extension, for use in the isolation of water and gas on domestic, commercial and industrial premises.
AVK has an extensive range of internationally approved PE ball valves, ranging as of OD25 up to OD180mm. Made from high performance PE100-RC material AVK PE ball valves offer excellent resistance to slow crack propagation and can be welded to all PE100 and PE80 pipes making the valve an integral part of the fully welded leak-free pipe system. Full bore design ensures a reduced pressure drop and greater flow through the valve. All spigot ends can be delivered with double spigot length option, allowing for a second electro fusion weld if needed.
| Variant 85/50-004 | |
|---|---|
| Connection: | PE Pipe Ends |
| Material: | Polyethylene (PE) |
| DN: | DN50 - DN150 |
| PN: | PN 16 |
| Closing direction: | Clockwise to Close |
Features
- Robust design, suitable for most harsh environments
- Material selection body and spigot (PE100-RC) offering excellent resistance to crack propagation
- Seat, ball and grease combination ensuring low operating torques and avoids sticking over time
- Selected ball material offering good scratch resistance
- Grease with minimal wearing off from the lubricated surfaces for improved long term performance
- With stem extension ensuring easy operation of lower buried valve
- ASSIST (QR-code) asset management to record, track and identify where valves are located and ensure traceability at all times
- Seat compression of large sealing surfaces precisely set via separate pre-assembly
- Flexible spindle shaft to ensure equal compression around the O-rings when loaded by internal pressure
- Fully automated socket welding of stem extension for optimal reliability
Reference nos. and dimensions:
Scroll for more info
| AVK ref. no. | D4 mm |
D6 mm |
D1 mm |
D2 mm |
D3 mm |
D5 mm |
D7 mm |
D8 mm |
D9 mm |
D10 mm |
D11 mm |
D12 mm |
D13 mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 85-063-501220400520 | 63 | 50 | 440 | 810 | 140 | 5.8 | 40 | 49.5 | 25.5 | 128 | 635 | 700 | 730 | 3.9 |
| 85-090-502220400520 | 90 | 74 | 545 | 855 | 185 | 8.2 | 40 | 49.5 | 25.5 | 158 | 645 | 710 | 755 | 6.4 |
| 85-110-501220400520 | 110 | 86 | 585 | 875 | 210 | 10.0 | 40 | 49.5 | 25.5 | 165 | 645 | 710 | 765 | 8.2 |
| 85-125-501220400520 | 125 | 86 | 595 | 875 | 210 | 11.4 | 40 | 49.5 | 25.5 | 176 | 635 | 705 | 765 | 8.6 |
| 85-160-501220400520 | 160 | 120 | 710 | 1045 | 285 | 14.6 | 40 | 49.5 | 25.5 | 196 | 750 | 815 | 895 | 18.4 |
| 85-180-501220400520 | 180 | 120 | 725 | 1045 | 285 | 16.4 | 40 | 49.5 | 25.5 | 210 | 740 | 805 | 895 | 19.4 |
Enquiry
Scroll for more info
Components
| 1. | Connector | PA GF |
| 2. | O-ring | NBR rubber |
| 3. | Lock pin | PVC |
| 4. | Body | PE 100-RC |
| 5. | Stem | POM |
| 6. | Support ring | PE 100-RC |
| 7. | Ball seat | NBR rubber |
| 8. | Seal retainer | PE 100-RC |
| 9. | Ball | POM |
| 10. | Connector | PA GF |
| 11. | O-ring | NBR rubber |
| 12. | Bearing ring | PA 6 |
| 13. | O-ring | NBR rubber |
| 14. | Lock pin | PVC |
| 15. | Profile | Stainless steel |
| 16. | Extension pipe | PE 100 |
| 17. | Bearing ring | PA 6 |
| 18. | O-ring | NBR rubber |
| 19. | Spigot | PE 100-RC |
Standards
- EN 12201-4, EN 1555-4, GB15558.3, ISO4437-4